For oil and gas equipment makers
3D films of your machine, built from your CAD.
Exploded views, cutaways and how-it-works films, made in Blender from your CAD or drawings. They play on a phone, a website or a booth screen. No need to ship the machine.
See if your machine is a fit- One product, 30 seconds, from $4,500
- Your files stay on our computers
What to send us
Any one of these is enough to start.
You do not need a clean model. Tell us what you have and we will say what is possible.
- 3D CADThe best start. STEP, SolidWorks and similar files. We build the film straight from them.
- 2D drawingsAssembly and part drawings work. We rebuild the machine in 3D and check every part against your drawing.
- Photos and spec sheetsEnough to tell you what is possible and what we would need next. Say so on the form.
What you get
One machine, one loop, built from your drawings.
Start with a 30-second film of one product. It is the fastest way to see what we make from your files.
- The filmOne product, about 30 seconds, made to loop with no jump. An MP4 at your screen's size, a 9:16 cut for social, and one still.
- Built from your filesYour CAD or drawings go in. Every model is checked against your drawing before you see the first cut.
- Two rounds of changesIncluded across the storyboard and the first cut. The final gets fixes for real mistakes only. Anything past that is quoted before we start.
- It is yoursOnce paid in full, you own the film, its files and the 3D model we built for it. Use them anywhere, no time limit.
- Your drawingsThey stay on our computers and are used only for your film. Work in progress goes only to people you name, on unlisted links.
- PaymentHalf to start, half when you get the final files.
How it works
Three steps. You approve each one.
No step starts until you approve the one before it. An email that says approved counts.
- StoryboardYou send the CAD or drawings. We send back the shots, in order, so you see the film before we build it.
- First cutThe whole film, built from your files. We check every model against your drawing first. You send one list of notes.
- FinalYour notes go in and the final files come to you. That is when the second half is due.
Why a film
Next to a PDF or a cutaway model.
| Question | A PDF or photos | A physical cutaway | A BuiltFirst film |
|---|---|---|---|
| Shows how the inside works | A still picture | Only what was cut open | Parts move, in order |
| Needs the machine shipped | No | Yes, or a model is built | No |
| Plays on a phone, a website or a booth screen | A static page | No | Yes |
| Shows parts too big or sealed to open | Only if someone drew them | Only the parts that were cut | Yes, built from your drawing |
Price
The price is the same for everyone.
If the budget is tight, we make the film smaller. We do not cut the price.
See if your machine is a fit- 30-second loopOne product$4,500
- 30-second loopMore than one product$6,000
- Full filmFor longer films$12,000 per finished minute
After you send the form
What happens next.
The form takes about two minutes. Your answers go straight to Wyatt.
- You pick a timeIf your files and budget fit, a calendar opens on the same screen. If they do not, you get a plain answer and where our prices start.
- A 20-minute callOn Google Meet. We look at your files together and choose the one machine to start with.
- A written scopeAfter the call you get the shots, the price and the dates in writing. Nothing starts until you say yes and the first half is paid.
Not ready for a full film?
Start with one machine.
Pick the product people ask the most questions about. We build the inside of it from your drawings, and you get a loop you can put on a screen at your booth, on your website or in front of a customer.
See if your machine is a fitQuestions
What people ask first.
What files do you need?
3D CAD is the best start. 2D drawings work too. If all you have is spec sheets or photos, say so on the form and we will tell you what is possible.
How do you keep it accurate?
Every model is checked against your drawing before you see the first cut. One person on your side approves each step, so nothing moves on without a yes.
How long does it take?
You get a firm date the day your files arrive. Every model is checked against your drawing before it is animated. If files, notes or payment come late, the dates move day for day.
Who owns the film?
You do, once you have paid in full. The film, its files and the 3D model we built for it are yours to use anywhere, with no time limit. We keep our own tools and templates.
Do we have to ship the machine?
No. We build from your CAD or drawings.
What happens to our drawings?
They stay on our computers and are used only for your film. Work in progress goes only to the people you name, on unlisted links.
Start with one machine.
Tell us which machine and where the film will play. If it is a fit, you pick a time for a 20-minute call on Google Meet.
See if your machine is a fitRather skip the questions? Go straight to the booking page, or call (337) 552-8293.